Three Axis Injection Machine Manipulator

Borunte Robot Co., Ltd. is one of the most reliable manufacturers and suppliers of three axis injection machine manipulator in China, also supports customized service with low price. Please feel free to wholesale advanced three axis injection machine manipulator for sale here from our factory.

BRTNG09WSS3PF

Product description

Three axis injection machine manipulator apply to all types of horizontal injection machine ranges of 160T-380T for take-out products. After installing the manipulator, the productivity will be increased by 10-30% and will reduce the defective rate of products, ensure the safety of operators, reduce manpower and accurately control the output to reduce waste. Three-axis driver and controller integrated system: fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, can simultaneously control multiple axes simple equipment maintenance, and low failure rate.

Three axis injection machine manipulator demonstration of on-site crane:

During the lifting process, operators need to wear safety helmets, operate in a standardized manner, and pay attention to safety. During the operation of the machine, it is necessary to promptly support passing pedestrians in order to prevent them from passing over their heads.

The length of the lifting rope should be 3.5 to 4 meters, and the load-bearing capacity should be greater than 1 ton.

Due to structural factors, some sliders of TNG series is not convenient to use pneumatic oiling guns for oiling operations. After using a pneumatic oiling gun to oil the sliders that can be oiled at both ends of the drawing part, a grease brush is used to wipe and maintain the drawing part. The drawing part is moved to the extreme edge, and employees wipe the line rails of the mechanical arm drawing part.

Three axis injection machine manipulator maintenance and repair：

1 Work Procedure:

During the use of the equipment, as the operating time increases, the technical performance of various mechanisms and parts gradually deteriorates due to various factors such as friction, corrosion, wear, vibration, impact, collision, and accidents.

2. Maintenance work content:

According to the nature of maintenance operations, they can be divided into: cleaning, inspection, tightening, lubrication, adjustment, inspection, and supply operations. The inspection operation is carried out by the client equipment maintenance personnel, or with the cooperation of our company’s technical personnel.

(1) Cleaning, inspection, and supply operations are generally carried out by equipment operators.

(2) The fastening, adjustment and lubrication operations are generally performed by the Mechanic.

(3) Electrical work is carried out by professional personnel.