High Quality Servo Manipulator

Borunte Robot Co., Ltd. is one of the most reliable manufacturers and suppliers of high quality servo manipulator in China, also supports customized service with low price. Please feel free to wholesale advanced high quality servo manipulator for sale here from our factory.

 

 

What are the characteristics of a high quality servo manipulator:

 

 

1. The front and rear servo makes it easier to take out the product, and the front and rear movement distance is large;

 

2. The servo machine is driven by a servo motor, which has fast motion speed and accurate positioning.

 

3. Equipped with electric adjustment, easy to operate;

 

4. The application of a double speed mechanism, resulting in faster arm speed; The advantage of low machine height allows for installation in low factory buildings;

 

5. The arm is made of high-strength aluminum profiles, paired with precision linear slide blocks; Light weight, good rigidity, low friction, and long service life;

 

6. Posture combination design, fixed rotation of 90 degrees, can be used to remove products with fixed or mobile molds;

 

7. The dual arm structure allows for simultaneous retrieval of products and water outlets, and can also be used independently with either arm;

 

8. The machine adopts a fast up and down picking method inside the mold, and a slow placement of products and nozzles outside the mold to shorten the molding cycle, resulting in more stable performance and safer movement.

 

 

Stack Action programing of high quality servo manipulator:

 

Click “Stack” to enter the stacking instruction page, as shown in the figure below:

 

 

Select the box on the left of the stacking program to be inserted. For example, select the first group of stacking programs, and then click the “Insert” button to insert the programs before the program step to start stacking. During automatic operation, the manipulator will stack and discharge products according to this stacking program. If you are using the Y axis for stacking, be sure to insert the stacking program one step ahead of the descending action of Y axis.

 

 

 

Each automatic program can insert 7 groups of stacking programs, which can be inserted in 7 different positions for stacking and discharging products. When using the 7 groups of stacking programs, the home point should all be 0.

 

Important: The Y axis is selected in the system design as the end between stacks. The stacking program must be inserted before the action of Y axis. If there are multiple stacks, it is required to insert the Y axis between the stacks to partition them.